Drip Irrigation Tape Wholesale Supplier
Thin-wall flat drip tape for row crops, offering low-cost seasonal irrigation with uniform emission
Full Technical & Wholesale Specifications
| Flat Width / Diameter | Ø16 mm (flat width 25 mm), Ø20 mm available |
| Wall Thickness | 0.15 mm - 0.6 mm (6 mil - 24 mil) |
| Material | Virgin PE with UV stabilizer |
| Emitter Spacing | 10 / 15 / 20 / 30 cm, custom spacing available |
| Emitter Flow Rate | 1.0 / 1.38 / 2.0 / 2.8 L/h per emitter |
| Working Pressure | 0.4 - 1.2 bar |
| Roll Length | 500 m / 1000 m / 2000 m per roll |
| Application | Vegetables, strawberries, cotton, sugarcane, seasonal row crops |
Additional Attributes & Standards
Product Overview & Engineering Notes
Drip Irrigation Tape
Flat, thin-wall drip tape that inflates under pressure. The most economical drip solution for seasonal row crops where tape is replaced each growing cycle.
Continuous labyrinth channel provides even water distribution along the run. Thinner walls suit single-season use; heavier walls support multi-season reuse.
Specifications shown are typical ranges — wall thickness, emitter spacing and roll length are made to order.
Key Engineering Features & Performance
Review the actual specification and agree sample checks for your intended use. Product-specific data takes precedence over general selection guidance.
Exposure & Material Review
Specify sunlight, temperature and service life requirements. Request evidence for the quoted material under the intended conditions.
Emitter & Flow Selection
Compare emitter spacing and measured flow at the working pressure, water quality and lateral length of your field.
Water Quality & Connections
Define filtration, flushing and water quality requirements with the irrigation designer; no clog-free guarantee is implied.
Installation & Handling
Confirm bend limits, installation method, storage, coil handling and sample checks before committing to a field installation.
Custom Specifications & Production Capabilities
Send the required material, dimensions, colour and performance criteria. Availability and feasibility are confirmed for the quoted product.
Diameter & Wall Thickness
Send the required diameter, wall thickness, pressure rating and connection standard.
Emitter Spacing
Confirm spacing against crop layout and the quoted emitter specification.
Flow & Working Pressure
Confirm flow at the specified pressure and agree a representative lateral test.
Coil & Packing Length
Confirm order length, coil dimensions, labels and transport packing for the requested specification.
Export-Ready Packaging & Container Logistics
Agree protection, packing dimensions, labels and handling requirements for the actual route. Inspect the packing before dispatch.
Export-ready packaging with protective wrapping, carton or wooden case reinforcement, palletizing when needed, and shipping documents prepared for sea, air, or courier delivery.
Pallet & Coil Protection
Coils are tightly bound with strapping and wrapped in thick UV-resistant PE stretch film with reinforced cardboard labels.
Full Container Loading (FCL / LCL)
Calculate loading from actual package dimensions, weights, stacking limits and the selected container. Compare FCL and LCL options for the route.
Dispatch & Lead Time
Lead time: To be confirmed in quotation. Confirm production completion, loading port and freight schedule for the order.
Wholesale Procurement FAQ
Q: Can you customize the Drip Irrigation Tape for my market?
A: Yes. Send target quantity, specification, packaging requirement, destination port, and any standard you need. We will confirm MOQ, lead time, and export quotation.
Q: Can I request samples before bulk order?
A: Sample orders are supported for most products. For machinery and special projects, we can provide technical files, photos, videos, and factory acceptance checks before shipment.
Request Wholesale Quotation for Drip Irrigation Tape
Send quantity, dimensions, material requirements and destination. We will confirm the specification, packing and written quotation details.
Request Wholesale Quote
Send material, size, quantity and destination details. Our sales team will reply with MOQ, lead time, packaging and export quotation.
